Showing posts with label disable. Show all posts
Showing posts with label disable. Show all posts

Thursday, April 7, 2011

wireless autoswitch for disabling wireless on laptops when connected to the LAN

There's very little talk as far as I can about the problem of a wired laptop using its wireless connection even though it is actively wired. There is no scenario where you want your wireless to take precedence over your wired connection if both are available. But that is the default setting in Windows (wireless is preferred). And even if you make the wired connection the priority via this method:

If you're off the dock and not plugged in - and then sit back down at your dock, you'll still be wireless. I'm pretty sure it's also that way if you are wireless at home, put the laptop to sleep, and then come into the office and dock (wireless will take precedence). With Dell Latitude E Series laptops in ControlPoint, I found an option to disable the wireless when the wired connection is detected.

When working with a client's Toshiba Portege R600 who has very weak wireless within the office, I wanted to disable his wireless when wired but have it automatically re-enable when the wired connection is disconnected. I ended up using Wireless AutoSwitch XPV, which works exactly like I want it to. It's available here:

It costs $7.95 - which is a shame because it should be built into Windows.

Friday, October 26, 2007

Dell Latitudes and disabled NICs

One thing I've had trouble with off and on is that Dell laptops with Broadcom network cards disable the NIC when you unplug the power cord and a network cord is not in. This can create problems when you have users who work on a wired connection at their office and then take their laptop home and work wirelessly on battery and then bring their laptops back in. When you clod boot a computer, the NIC comes back on, but if the laptop was asleep, in my experience it does not.

Personally, I've always preferred to just disable that power saving feature. The Broadcom applet in the Control Panel doesn't do it, so I have found the best way to do it is to do this:

Unplug the network cable
Unplug the power cable
For about 3 seconds a Broadcom window will come up that will say "your internal network card has been deactivated. Click here to change preferences"
And then you tell it to "always activate on battery"

You can do this in the dock or not in the dock.